Dirt Cleaning After Use of Electric Hoists

Electric hoist equipment is used in many industries. It plays a very important role in the hoisting operation of the crane, but how should the dirt be cleaned after use? The following methods will help you.

If there is dirt and dust in the gaps, you can drop a few drops of oil in them, and wait a few minutes for the oil to fully penetrate. At this time, you can tie a rag to hard and thin objects, such as iron wires, to clean the dirt with force. Do not wash with water to prevent the motor from entering the water and burning the electric hoist. The electric hoist saves a lot of labor for our operation and greatly improves work efficiency, but it is not enough to use alone and must be maintained. Only when it is well maintained will it bring convenience to the work.

If it is opened and disassembled for cleaning, do the following: Before cleaning the electric hoist, remove all power cords and parts. When disassembling, follow the installation sequence and store the parts in a fixed location to avoid loss. Soak the parts except for the reducer, limiter, and motor in kerosene, and then scrub with a slightly damp cloth. After the parts are dry, assemble the electric hoist according to the installation sequence and put it in a dry, ventilated place. After cleaning, all parts need to be lubricated for maintenance when completely dry. Developing a good habit of regular cleaning can not only improve work efficiency, but also greatly extend the service life of electric hoists.

Always keep the parts of the low-headroom electric hoist equipment dry. After the operation, please move the equipment away from a humid area, a high-temperature area, or a chemical area to maintain its performance and prolong the service life of the equipment. When the equipment is not used for a long time, anti-rust treatment, cleaning, and maintenance should be done, and it should run up and down for 1-3 minutes to maintain its performance. Regularly check the condition of the lubricating oil every month; if it is insufficient, add oil.

For the electric chain hoist,the shell of the electric chain hoist has a beautiful appearance and an aesthetic effect. The second is to protect the internal parts of the electric chain hoist, which can better prevent dust during the lifting process, etc. Impurities enter the interior, avoiding or reducing damage to parts and reducing maintenance costs and time.

In addition to dust and other sundries, such as catkins entering the interior, this will also affect the use of the electric chain hoist. When the electric chain hoist is impacted from the outside, it will play a protective role. The shell is stressed first, which can reduce the situation of the internal stressed parts. Slight damage to the case will not affect use.

If the cover of the electric chain hoist chain is dirty, it should be carefully wiped and maintained. Do not wipe with steel balls, hard-bristle brushes, etc., as this will cause the cover to wear and tear, which may cause the paint to peel off and rust over a long period of time. Cleaning is simple; just put a few drops of kerosene on the cover and wipe off the oil with a cloth. After reaching a certain effect, wipe off excess oil with a clean cloth.

Although cleaning the electric chain hoist cover is very simple, it is very important. We need to take care of it in daily use and check it regularly. Only when our product is well maintained can we make better use of it to improve work efficiency.

If there is any inquiry for electric hoists, please free free to contact us.