C-type spreader, also known as C-shaped hook, is mainly used for horizontal lifting of the coiled plate. Because its shape resembles the literal C, it is called C-type spreader.Overhead lifting crane C hook is a type of crane lifting hooks.The c-type hook structure is simple and reasonable, the action is flexible, the use is convenient, and the lifting is safe and reliable.
C Hook Drawing
C Hook Main Parameters
The data in the following table is for reference only. The parameters such as width, inner diameter, outer diameter, ambient temperature and on-site use status can be provided by the user according to the actual situation on site. The drawings are provided by the company and confirmed by the user. For each type C spreader, the corresponding shelf can be equipped as needed.
C Hook Parameters for Reference
C Hook Structure
C hooks are mainly composed of spreaders and counterweight iron.
■ Hanging specific: The main part of the C-type hook is made of steel plate (high-quality low-alloy steel) and steel pipe. The cross-section is box-shaped structure, which has good resistance to bending and torsion. The spreader is light in weight and has a long service life.
■ Counterweight iron: to adjust the balance of the spreader, so that the center of gravity of the spreader and the object to be lifted is in a line
C Hook Application
C hook is one of necessary lifting tools for steel mills, cold-rolled sheet production and processing enterprises, storage and transportation warehouses, and other workplaces that use horizontal steel coils. C-type hooks are mostly used for lifting steel coils, aluminum coils, copper coils, wires and other coils;
C Hook for Lifting Steel Coil
C Type Hook Daily Maintenance
■ The used C-type spreader must be placed on a dedicated shelf and stored in a ventilated, dry, and clean factory, and kept by a special person.
■ The surface of the C-type hook should be protected against rust frequently, and it should not be stored in acid, alkali, salt, chemical gas and humid environment.
■ C hooks are prohibited from being stored in high temperature areas.
■ Regularly clean the rotating parts and regularly lubricate the oil to prevent dry friction and jamming.
C Hook Types
C-type hook are divided into single-plate type (applies to the inlet slot), I type, van type, cylindrical type (Apply to wire lifting). C hook includes counter balanced c-hooks, motorized rotating C hook, mill duty C hook, paper roll C hook, coil handling C hooks etc,.
Electric Rotary C-hook
Crane C hook can add protective measures in the contact position between the spreader and the lifted object according to the user's requirements, such as: rubber, nylon board, aluminum board, polyurethane, rubber pad and so on.
C Hook-Hook with Polyurethane Liner
C-type Hook-Hook Lower Half All-inclusive Polyurethane
- The last one：Other Crane Spare Parts of DJCRANES
- The next one:：Lifting Electromagnet for Cranes-Crane Lifting Magnet of DJCRANES