Current location:Home > Products> Hoist

Hand Chain Block of DJCRANES

Hand Chain Hoist/Manual Chain Block

Product TypeHand Chain Block
Lifting Capacity:0.5t to 100t
Lifting Height:0.5 to 3.5m
Working Class:       -
Ambient Temperature:-20℃ to 40℃

Hand Chain block Introduction

Hand chain block is one of the most economical material handling equipment. It has the advantages of manual operation, simple structure, high cost performance and wide application. In addition, there are stainless steel, bronze hooks, chain and other anti-flaming features. Wheels, etc., can be used for bracelet blocks. 

The lifting capacity of hand chain block is 0.5 to 100 ton, The main parameters are as follow: 

Product TypeHand Chain Block
Capacity0.5t to 100t
Lifting Height0.5 to 3.5m
Working Class-
Ambient Temperature-20℃ to 40℃

Applications of Hand chain block

■   Manual chain hoist/ Hand chain block is usually used to install machine or to handle good in short distance in the applications, such as, factory, mine, building site, dock, shipyard, warehouse, etc.  

■   Hand chain block shows its advantage when handling materials in open air or when the power supply is in short.

■   Hand chain block also can be applied to lift and transport cars, matched with monorail car, manual single girder overhead crane and suspension crane.

Advantages of Hand Chain Block

■   Safe and durable in use, confirming with the international standards.

■   Great toughness, small size, light weight, easy to handle.

■   Small pulling load, high strength of machine parts.

■   Advanced structure design and good appearance.

■   Manual lifting without power supply.

Features of Hand Chain Block

■   Durable main parts, made of high quality alloy steel.

■   800 Mpa high strength lifting chain, with the features of 20M2 material , intermediate frequency quenching heat treatment, low wear, anti-corrosion, etc.

■   High strength hook, with the features of alloy steel material, gesture type of hook, etc.

■   Slow lifting is available to avoid overload.

■   Confirming with CE safety standards

■   Strength and durable in use

■   High safety performance.

Working Principle of Hand Chain Block

To lift good upside, pull the chain clockwise and then sprocket runs, pressing ratchet wheel and brake base as a body to rotate together, long axis rotating teeth gear, short axis and spline hole gear. Thus the lifting sprocket on the spline hole gear will drive the lifting chain to lifting goods stably.

Lifting goods down, anticlockwise pulling the chain, the brake base will separate from the brake pad, ratchet wheel will stop under the influence of ratchet pawl, five long shaft lifting sprocket driven gear in the opposite direction, then lifting goods stably. 

The chain block adopts ratchet friction chip one-way brake, can brake under load condition, ratchet pawl mesh with the ratchet wheel under the influence of spring, make the brake work safely.

Hand Chain Block Structure


Leave Message

We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.